Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Shelly Plus 2PM offers cover mode for direct control of bidirectional motors, ideal for automating gates, blinds, and shutters, especially beneficial for older gate motors. It manages motor opening and closing by controlling direction and power, ensuring precise operation. By connecting to motor control wires, it replaces manual switches, enabling integration into smart home setups for remote control and scheduling. The device includes power monitoring and safety features to prevent motor damage, making it a versatile addition for modernizing motor-driven installations.

Required Components

Shelly_Plus2PM_x1-1200x1200.webp

  • Shelly Plus 2PM

The Shelly IP6610755 might not be essential for many scenarios. It is recommended to assess the space within current motorized gate controllers to decide if its use is required.

Use a 2-wire reed switch rugged enough to withstand the elements to which it is exposed.

Wiring Diagrams

Shelly Plus 2Pm Cover Mode

image-20240619-212046.png

After installation a calibration process will need to run, Shelly Smart Control will prompt you for this.

Failure to complete cover mode calibration may result in damage to the motor.

Shelly Plus 2Pm can be powered by either 24vDC or 120vAC.

Shelly Smart Control App Configuration

Adding the device to Shelly Smart Control.

  1. Open the Shelly Smart Control app.

  2. Tap the blue + icon at the bottom right.

  3. Tap + Add a New Device.

Picture1.png

  1. Tap Add Via WiFi (AP Scan).

Picture2.png

  1. Tap Next.

  2. Tap the relay.

  3. Tap Next.

  4. Tap + Add Device. The inclusion process lasts for several moments.

Picture3.png

  1. Type a name for the device.

  2. Select an image to represent the device in the Smart Control app.

  3. Select the Room to add the device to. Tap Save.

  4. Tap Next. The device is associated with your Smart Control account.

Picture4.png

The relay is now included in the Shelly app and registered to a Cloud Account. It can be controlled from any location where internet is available.

Updating the Firmware of the Device.

  1. Tap the device to update.

  2. Tap the Settings button.

  3. Tap the Firmware version dropdown.

  4. The option to enable auto-update is presented, as is the current and available firmware version. Tap Update, then tap Update again.

  5. The device updates

Picture5.png

The update process may take several moments and require resetting the device. It is not recommended to perform a firmware update if the device is not physically reachable.

Enabling Cover Mode

  1. In the Shelly Smart Control app, tap the Plus 2PM

  2. Tap the Gear Icon

  3. Tap Device Information

  4. Tap the Blue IP Address next to Device IP

  5. Tap the When on, turn off after XX seconds checkbox.

  6. Enter 0.5 and tap Save. The App will confirm the change

image-20240410-203604.png

Conclusion

Integration of a Shelly Plus 2PM presents a robust and efficient solution for controlling older motorized gates. This guide has navigated through the necessary steps, from setup and wiring to configuration, ensuring that this solution is effectively integrated.

  • No labels