Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Shelly Plus Wall Dimmer - Dim A Light.jpg

Important: This solution is not suitable for beginners and requires:

  • Multi-switch wiring

  • Networking - Static IP addresses

  • Scripting

81S2iD1FbBL._AC_SL1500_.jpg


Product Specifications

Shelly Plus Wall Dimmer Specifications:

  • 110-240vac

  • 150w max dimmable LED/CFL

  • 400w max incandescent

  • 150w max ceiling fans

Note: Can be used in 3-way or 4-way configuration. See link below.

Shelly Plus Wall Dimmer 3-way install:

  • Wire one switch to control the light fixture.

  • Wire up to 4 satellite switches, each with output capped off.

  • Install the script from linked below on each switch to synchronize settings

Multi-switch Dimmer Synch Script and Instructions

https://github.com/ALLTERCO/shelly-script-examples/blob/main/n-way-dimmer.js

This solution allows you to use up to 5 Plus Wall Dimmer switches in a group to synchronize settings between all switches, with one switch directly controlling the light fixture.

If you wish to review the script before loading, please use the link above.

Note: You must assign a static IP address to all switches used in this configuration. See the link below for information on assigning a static IP.

Note: You may use up to 5 switches with this script (counting the primary switch controlling the fixture).

Instructions (after hardware setup is complete):

  1. Open the Shelly Smart Control app or https://control.shelly.cloud via browser

  2. Navigate to Shelly Plus Wall Dimmer

  3. Select the scripts menu

  4. Select “Open library”

  5. Select “n-way-dimmer.js”

  6. Select “Insert code”

  7. Modify the list of IP addresses on line 16 to match the IP addresses of your switches.

  8. Repeat steps 2-7 for each switch in the dimming group

Note: There is a slight delay in synchronization between each switch, By placing the main switch first in each group of IP addresses, there is no noticeable delay in lighting control.

Setting Static IP Address

Shelly Tips – Static IP Addresses

Full Product Specifications - Shelly Knowledgebase

https://kb.shelly.cloud/knowledge-base/shelly-plus-wall-dimmer

  • No labels