Gate Control with Shelly Plus Uni

Owned by Michael Salerno
Last updated: Jun 20, 2024
4 min read

The incorporation of advanced control and monitoring solutions for motorized gates goes beyond enhancing convenience for homeowners; it also enhances security and efficiency within the home ecosystem. This technical guide details the installation process of a Shelly Plus UNI powered by 24vDC supplied by the gate circuit board, paired with a reed switch, to achieve precise control over motorized gates. This setup facilitates remote operation and allows for accurate status monitoring through Shelly Smart Control, introducing a higher level of automation and intelligence to your installations

The suggested installation approach and hardware selection are ideal for gate control enclosures with limited space, where other options are not feasible.

Required Components

 

Shelly_Uni_625x625.png

 

 

 

  • A reed switch (not provided by Shelly)

  • Shelly IP6610755 Enclosure – This enclosure is specifically designed for robust outdoor applications with IP66 protection.

Some components needed for this solution will need to be sourced elsewhere.

The Shelly IP6610755 might not be essential for many scenarios. It is recommended to assess the space within current motorized gate controllers to decide if its use is required.

Wiring Diagrams

Shelly Plus Uni with a Reed Switch

 

Uni Diagram.png

 

 

 

Shelly Smart Control App Configuration

Adding the device to Shelly Smart Control.

 

 

  1. Open the Shelly Smart Control app.

  2. Tap the blue + icon at the bottom right.

  3. Tap + Add a New Device.

 

 

 

 

 

  1. Tap Add Via WiFi (AP Scan).

 

 

 

 

  1. Tap Next.

  2. Tap the relay.

  3. Tap Next.

  4. Tap + Add Device. The inclusion process lasts for several moments.

 

 

 

 

 

 

  1. Type a name for the device.

  2. Select an image to represent the device in the Smart Control app.

  3. Select the Room to add the device to. Tap Save.

  4. Tap Next. The device is associated with your Smart Control account.

 

 

Updating the Firmware of the Device.

 

 

 

 

  1. Tap the device to update.

  2. Tap the Settings button.

  3. Tap the Firmware version dropdown.

  4. The option to enable auto-update is presented, as is the current and available firmware version. Tap Update, then tap Update again.

  5. The device updates

 

 

Creating an Auto Off Timer

 

 

 

 

  1. In the Shelly Smart Control app, tap the Plus 1

  2. Tap the Timer icon.

  3. Tap the When on, turn off after XX seconds checkbox.

  4. Enter 0.5 and tap Save. The App will confirm the change

 


Configuring the Input State Display

 

 

 

 

 

  1. Tap the Application settings tab.

  2. Select Add input state identifier to the power button.

 

Configuring Input/Output Settings

  1. In the Shelly Smart Control app, tap the device to be configured.

  2. Tap the Settings tab.

  3. Tap the Input/Output Settings dropdown.

  4. Select input button/switch mode - Select whether this relay will be activated by a Button or Switch. This selection determines the availability of additional settings.

  5. Set relay type – Select Set Shelly device to be in "Detached" switch mode - switch is separated from the relays.

  6. Set relay power on default - Select Configure Shelly Device to Turn OFF, when it has power.

  7. Tap Save.

 

 

 

Conclusion

Integration of a Shelly Plus UNI presents a robust and efficient solution for controlling motorized gates. This guide has navigated through the necessary steps, from setup and wiring to configuration, ensuring that this solution is effectively integrated.